Commercial authorisation
FAA Part 135 current listing1 operator
This aircraft is currently listed by the FAA as authorised for Part 135 operation. This does not prove that it has flown charter services. View operator details.
N100FN
FAA · N-Number United StatesV Valid Registration On watch list Updated
- Mode-S hex
-
A0053E - Serial
- RK-566
- Type
- Fixed wing multi engine
- Manufacturer
- HAWKER BEECHCRAFT CORP
- Model
- 400A
- Year
- 2008
Overview
Aircraft
Make / model- Manufacturer
- HAWKER BEECHCRAFT CORP
- Model
- 400A
- Type
- Fixed wing multi engine
- Category
- Land
- Engines
- 2 × P&W CANADA JT15D-5R
- Seats
- 10
- Year
- 2008
Registrant
MASTER
LLC
MEANDER AIR II LLC
REGISTRANT SINCE ·
Live tracking
Mode-S
Mode-S hex code (24-bit ICAO)
A0053E
This is the unique transponder address this airframe broadcasts. It does not change when the registration changes hands.
Key dates
Lifecycle2008
Manufactured
Airworthy
Cert issued
Last action
Expires
Recent changes
Members onlyChange history for this aircraft is available to signed-in members. See what's included.
Market intelligence
Members onlyMarket-intelligence filings (FAA registrations only) are available to signed-in members. See what's included.
Technical
Airframe
ACFTREF- Manufacturer
- HAWKER BEECHCRAFT CORP
- Model
- 400A
- Type aircraft
- Fixed wing multi engine
- Category
- Land
- Weight class
- Light
- Year mfr
- 2008
- Serial number
- RK-566
Powerplant
ENGINE ref- Manufacturer
- P&W CANADA
- Model
- JT15D-5R
- Type
- Turbo-fan
- # of engines
- 2
- Thrust
- 2,965 lbf
Capacity & weight
Performance- Seats
- 10
- Weight class
- Light
FAA uses a weight category code rather than exact pounds. Weight classifications reflect the aircraft type certificate data.
Registration
Status
Current
V
Valid Registration
The certificate is valid through . Last action by FAA .
Part 135 operators
Current FAA operator-and-aircraft list1 current
- 3CMA
- AIRCRAFT MANAGEMENT GROUP INC · 135
Currently listed by the FAA as authorised for Part 135 operation. Authorisation does not prove actual charter flights or ownership.
Certificate
Airworthiness- Type registrant
- LLC
- Airworthiness
- 1T
- Airworthy since
- Cert issued
- Last FAA action
- Expires
- Fractional owner
- No
- FAA region
- Eastern
Registrant
MASTER address
Active
- Owner name
- MEANDER AIR II LLC
- Type
- LLC
- Registrant since
- Street
- C/O AIRSIDE BUSINESS PARK
- Street 2
- 300 HORIZON DR
- City
- MOON TOWNSHIP, PA 151082794
- County
- 003
- Country
- United States
Safety
Safety records
6 on file
6
Safety records on file
2 investigations ·
4 wildlife strikes
27 Aug 2024
Most recent record
None
Highest injury level
Substantial
Worst aircraft damage
-
08:05 1622137 FAA Wildlife Wildlife strike N-number matches, but model differs Location: DANE COUNTY REGIONAL ARPT-TRUAX FLD, WI Injury: Unknown Damage: None
Record details
- Aircraft
- BE-400 BJET
- Occurrence
- Species: American kestrel; Phase: Landing Roll; Effect: None
- Operator
- BUSINESS
- Species
- American kestrel
- Phase
- Landing Roll
- Effect
- None
- Components struck
- Other (PART NOT REPORTED)
- Remarks
- Aircraft struck wildlife on landing roll to RWY 14. Airport operations inspected runway and found a dead American kestrel. No damage. NOTE: OWNER/ OPERATOR MEANDER AIR II LLC. MOR: RVJ100 LANDED RWY 14, REPORTED A BIRD STRIKE IN THE FIRST THIRD OF THE RUNWAY. SUSPENDED OPERATIONS TO RWY 14, OPS 4 CONDUCTED FOD CHECK, LOCATED AND IDENTIFIED KESTREL BIRD REMAINS ON THE RUNWAY. PILOT REPORTED NO DAMAGE TO AIRCRAFT AND WAS GIVEN THE FACILITY PHONE NUMBER IF THEY HAVE ANY DAMAGE TO REPORT LATER.
- Comments
- *** Strike Report: 2024-09-04-115218-R1( Report ID: 1578831 [ Comment: ] ) Merged From 2024-08-27-500759-R1( Report ID: 1622080 [ Comment: ] ) on Apr 8 2025 12:07PM By phyllis.r.miller@usda.gov ***
-
16:30 UTC ERA21LA379 NTSB Accident Location: Charleston, SC, USA Injury: None Damage: Substantial
Record details
- Record match
- N-number and serial number match
- Aircraft
- HAWKER BEECHCRAFT CORP 400A NO SERIES
- Occurrence
- Enroute-descent Part(s) separation from AC
- Operation
- Part 91 — General aviation
- Conditions
- VMC · Day · Wind 150° at 7 kt · Visibility 10 sm
- Operator
- Aircraft Management Group
- Accident narrative
- On September 14, 2021, about 1230 eastern daylight time, a Hawker Beechcraft Corp 400A airplane, N100FN, was substantially damaged when it was involved in an accident en route to the Charleston Executive Airport (JZI), Charleston, South Carolina. The two flight crewmembers were not injured. The airplane was operated by Aircraft Management Group as a Title 14 Code of Federal Regulations Part 91 repositioning flight.
The flight crew reported that they performed a standard preflight inspection of the airplane as it had just been released from scheduled maintenance from Winner Aviation, a Part 145 repair station at Youngstown Regional Airport (YNG), Youngstown, Ohio. The only discrepancy noted during preflight inspection was a loose screw on the nose cone, which was tightened by a mechanic before departure.
The flight was uneventful until the airplane was about 15 minutes from JZI. The flight crew reported that while descending about 1,500 feet per minute through about 21,000 ft, they heard a loud bang and felt a shudder and yaw. They disconnected the autopilot, and a noticeable yaw was felt; however, there were no anomalies noted on any flight or engine instruments. The flight crew continued and landed without further incident. During the post-flight inspection, they discovered that the left engine cowling had entirely separated.
Photographs provided by the Federal Aviation Administration (FAA) revealed that the fuselage and horizontal stabilator sustained substantial damage. Figure 1 shown below provides an overview of the left engine and cowling fastener areas at the forward and aft portion of the engine.
Figure 1: View of the left engine and cowling attachment areas. (Photos Courtesy of FAA)
Postaccident examination of the left engine found that the entire cowling had separated. Several fasteners that would normally be installed on the forward and aft attachment areas around the engine were missing. There were no abnormalities discovered with cowling fastener receptacle areas or nut plates that remained in place. The aft top attachment area, shown in the top right photo in Figure 1, showed evidence of a rearward pulling of the metal attachment area.
The right cowling remained attached. About 1 month after the accident, a large dent and rippling were discovered in the middle and top inboard cowling areas. A stripped fastener was observed on the right cowling; however, no fasteners were missing.
Investigators contacted local authorities near the presumed area of the cowling separation; however, the cowling sections were never located.
According to a representative of Winner Aviation and company work orders, on September 13, 2021, the airplane had been signed off for an A and B inspection, which required the removal and re-installation of the engine cowlings. The mechanics involved in re-installing the cowlings reported that several fasteners on the left cowling had to be loosened and tightened a second time during re-installation due to an alignment issue with the cowling panels. The mechanic who resolved the alignment issue reported that he re-tightened the fasteners and noted that “everything was secure and double checked.” The mechanic also reported that he replaced some of the fasteners as some were missing and the overall condition of others warranted replacement. The following day another mechanic looked at the airplane before the accident flight and did not notice any abnormalities. No mechanics observed any dents on either cowling.
According to the Hawker Beechcraft 400/400A Maintenance Manual, the cowling consisted of four removable sections that fully enclosed the engine. The cowling panels were secured by several quarter-turn fasteners located around the circumferences of the forward and aft engine areas.
In December 2006, Raytheon Aircraft Company issued a Service Bulletin titled Nacelles – Engine Cowling Fastener Modification. The bulletin required a modification to the engine cowling attachment hardware to provide threaded fasteners at specific locations on the engine cowling panels. The bulletin stated that three reports had been received related to cowling panel separations and that aerodynamic forces acting on unsecured cowlings could cause panel separation or damage to the engine and nacelle components. In October 2007, the FAA issued an Airworthiness Directive making the Raytheon Service Bulletin mandatory. The accident airplane was manufactured after the issuance of the original service bulletin, and the cowlings had been modified per the bulletin.
On April 29, 2022, the FAA published Special Airworthiness Information Bulletin (SAIB-AIR-22-10), Engine Cowling System, Quarter-Turn Fastener Maintenance Information. The bulletin highlighted several incidents and accidents that involved cowling separations and provided several best practices that mechanics can use to ensure cowlings are properly and securely installed. This accident was one of several events highlighted in the SAIB. - Factual narrative
- The flight crew initiated a positioning flight following major maintenance, which included the removal and re-installation of both engine cowlings. The flight was uneventful until about 15 minutes from the destination. While descending, a sudden bang and yaw occurred. There were no annunciations or other warnings observed before or after the event, and the airplane remained controllable. The flight crew continued to the destination and landed without further incident. On the ground, it was discovered that the entirety of the left engine’s four-panel cowling had separated in flight and impacted the rear fuselage and horizontal stabilizer resulting in substantial damage.
Further examination of the left engine area revealed that several cowling fasteners were missing from the receptacles. During maintenance immediately preceding the flight, the left cowling fasteners had to be removed a second time due to an alignment issue with the panels. The mechanic who performed the work reported that the misalignment was resolved, and the fasteners were tightened. A second mechanic visually inspected the work and did not notice any abnormalities, nor did the pilots during their preflight inspection.
It is likely that several fasteners departed the left cowling during this first flight after maintenance, which resulted in a rapid departure of the cowling panels. Given that none of the cowling was recovered, the initiating factors that would lead to the separation could not be determined. Denting and rippling were discovered on the right cowling; however, the investigation was unable to determine when the damage was incurred as it was not discovered until about 1 month after the accident. The mechanics and flight crew did not recall observing any damage to either cowling before flight. - Cause narrative
- The in-flight separation of the left engine’s four-panel cowling for reasons that could not be determined based on the available evidence.
- Findings
- Aircraft-Aircraft structures-(general)-(general)-Unknown/Not determined; Aircraft-Aircraft structures-Nacelles/pylons structure-Nacelle/pylon misc structure-Unknown/Not determined
- Official record
- View NTSB docket
Full safety record preview
Showing 2 of 6 indexed Safety records for N100FN. Create a free account to view all matched records.
Safety records are matched from official aviation occurrence datasets, with serial/model context shown where available. This is an indexed record check, not an exhaustive safety record. Artifact built .